SANYO

9.0kW (Single & Three Phase)
The product range image
Product description

 

  • Environmentally friendly R744 (CO2) refrigerant
  • 9.0kW capacity
  • COPs of up to 4.1*
  • High performance DC rotary compressor
  • Inverter control and 3-phase 400V or single phase 240V power supply
  • High efficiency split refrigerant cycle
  • Reliable and rugged design
  • Freeze protection circuit
  • Highly efficient refrigerant-to-water heat exchanger

   *Outdoor temperature 25℃, Inlet water temperature 30℃, Outlet water temperature 50℃

 For more information see CO2 ECO overview section

 

The world’s first CO2 rotary two-stage compressor

At the heart of the CO2 ECO Heating System is SANYO’s innovative rotary two-stage compressor system, a world first in compressor design. The compressor is resistant to high working pressure differentials, has high reliability through load dispersion, low leakage and low vibration. It operates at a quiet 45 dB(A) noise level and, at only 9kg, the compressor is compact and lightweight.

  

 

 

Technical specifications
Model Number SHP-C90GEN SHP-C90GDN
Model number Tank unit SHP-TH90GEN-SW SHP-TH90GDN-SW
Performance 9.0kW Single Phase 9.0kW Three Phase
Heating capacity / input 9.0kW / 2.7kW (Outdoor temp. 7°C) 9.0kW / 2.9kW (Outdoor Temp. 7°C)
COP - Outdoor temp. +7ºC 3.3 3.1
COP - Outdoor temp. -15ºC 1.8 1.8
COP - Outdoor temp. -20ºC 1.6 1.6
Electrical Ratings - -
Power supply HP unit 1 ø / 230V / 50Hz 3 ø / 400V / 50Hz
Power supply tank unit 1 ø / 230V / 50Hz 3 ø / 400V / 50Hz
Maximum current HP unit 20A 10A
Maximum current tank unit 52A 22,5A
Tank unit - -
Tank capacity 223L 223L
Maximum working pressure 2.5 bar 2.5 bar
Maximum working pressure tap water 10 bar 10 bar
Auxiliary electric heater capacity 6.0kW + 6.0kW 9.0kW + 6.0kW
Dimensions Net H/W/D 1,235mm / 930mm / 340mm 1,235mm / 930mm / 340mm
Dimensions Shipment H/W/D 1,330mm / 1,044mm / 420mm 1,330mm / 1,044mm / 420mm
Weight Net / Shipping 105.0kg / 115.0kg 105.0kg / 115.0kg
Heat pump unit - -
Refrigerant / amount R744 (CO2) / 1.7kg R744 (CO2) / 1.6kg
Operation noise 49.0 dB-A 49.0 dB-A
Compressor DC Rotary 2 Stage DC Rotary 2 Stage
Rating Conditions

The cooling and heating capacities are based on the following conditions:

Cooling: Indoor temperature 27°C DB/19°C WB, Outdoor temperature 35°C DB/24° C WB.
Heating: Indoor temperature 20°C DB, Outdoor Temperature 7°C DB 6°C WB.

All specifications are subject to change without notice.

SANYO reserves the right to make any variations to the equipment described or to withdraw or replace products
without prior notification.

All descriptions, illustrations, drawings and specifications on this site are given in good faith, but are intended to
present only general particulars.